3M Scotch-Weld DP 8410NS - Acrylic Adhesive

For Bulk Orders Or Customised Requirements You May Have For 3M Scotch-Weld DP8410NS, Please Feel Free To Contact Us

3M Scotch-Weld Acrylic Adhesive DP8410NS Green has been recognised by Underwriters Laboratories (UL) for use in electrical equipment and electric signs. 

3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS Green has been tested for surface flammability, smoke, toxic gas generation and caloric content per ASTM E162, ASTM E662, ASTM E1354, Bombardier SMP 800-C and Boeing BSS 7239 test methods.

With a 10 minute work life and approximately 36 minutes to structural strength, the non-sag properties ensure the adhesive stays where it is applied and will not migrate during the bonding process. 

3M Scotch-Weld Acrylic Adhesive DP8410NS bonds well to many materials including most plastics, metals and oily surfaces. The finished bond provides excellent shear strength, peel strength and impact resistance.

With an 18-month room temperature shelf life, DP8410NS helps simplify inventory management.

Easy Adhesion With Acrylic Adhesives:

Acrylic adhesives are two-part methyl methacrylate (MMA) adhesives that provide excellent bond strength and durability.

Often referred to as epoxy adhesives or epoxy glue, acrylic adhesives belong to a separate chemical family with their own unique characteristics. Acrylic adhesives offer faster cure speeds, higher tolerance for oily or less prepared surfaces, and the ability to bond a wide variety of materials including many plastics.

DP8410NS - 45ml FGC - 62286014451

We Supply Scotch-Weld DP8410NS Adhesive / Glue To Sydney, Wollongong, Newcastle, Brisbane, Canberra, Melbourne, Adelaide, Perth & Throughout Australia!

Contact Us For All YOUR 3M DP8410NS High Strength Glue Requirements Today!

Order 3M Scotch-Weld DP8410NS Online Here For Australia Wide Delivery 

This is one of the most impressive adhesives you will come across. Scotch-Weld DP8410NS can bond materials where many other adhesives struggle.

Key Scotch-Weld DP8410NS Product Points:

• 10 minute work life with approximately 36 minutes to structural strength
• Durable bond with excellent shear, peel and high impact strength
• Bonds to a variety of surfaces including most metals and plastics
• High strength with minimal surface preparation
• Features spacer beads to control bond line thickness
• Cap can be replaced after use for future applications. If the nozzle is left attached, the adhesive may cure inside the nozzle and prevent reuse.

Please Note: If this is the first time you are ordering a Scotch-Weld Adhesive, it will not work unless you also have the following items:

• Scotch-Weld EPX Plus II Applicator - used to apply the adhesive
• EPX 10:1 Plunger - used with the applicator to correctly dispense the adhesive
• Scotch-Weld EPX Square Orange Mixing Nozzle - 45ml - attached to the adhesive cartridge to ensure correct mixing during dispensing

3M Scotch-Weld Acrylic Adhesive DP8410NS is a non-sag acrylic adhesive with a 10:1 mix ratio.

It features an 11 minute work life allowing time to position substrates before bonding. Working life, open time and cure speed can be adjusted with heat to reduce curing time.

Once fully cured, this adhesive reaches approximately 1,000 psi (7 MPa) overlap shear strength while providing excellent peel and impact performance. Full cure is achieved within 24 hours.

Recommended Applications For 3M DP8410NS High Strength Two Part Glue Include:

• Metalworking applications including HVAC and appliances
• Sporting goods and golf club repairs
• Specialty vehicles
• Sign manufacturing including panel to frame bonding, trim attachment, letter bonding and frame assembly
• Bonding plastics, composites, painted and powder coated metals
• Applications where fast assembly of smaller parts is required