After cutting tape, put a paper clip where the roll begins
Instead of using conventional pallet pads to line your pallets. We have Cost Effective Economy Pallet Pads available. If you are after a small quantity of pallet pads, use our 1220mm corrogated cardboard.
Instead of packing small products using void fill to take up gaps, along with packaging tape to seal boxes, use our range of different size Padded Mailing Bags we have available.
For long products, use our bubbletube. bubbletube is made to your required size, your product feeds straight into the tube, saving time on having to wrap each individual product, at the same time using minimal tape.
Save time & tape, use Filament Tape with an "L Clip" - a small tab of tape around 60mm in length that seals over each edge
Away from sunlight in a cool dry area.
Make sure that boxes are dirt & dust free,full surface contact is made with tape & box it is being applied too. (ie- run your hand along the tape)
rder continuous plastic tubing (polytubing), wind off the length required, & use a heat sealing machine to seal off the ends.You can also use a heat sealer to customise, change sizes of standard size plastic bags.
Keep your tape or envelopes in your office(at room temperature) if your factory is cold, as adhesives work better in warmer temperatures.
As this may put a knick in the roll, causing the
tape to tear everytime it unrolls - making the roll defective.
Snap On Seals (SO) are used for steel strapping. Open Seals (Open) are used for Polystrapping.
Below is a picture of Steel Seals that are designed to be used on Green Tensilised Strapping. When ordering, please mention that you are using Green Strapping to get the correct seals.