3M DP8005 -Scotchweld Adhesive - Specifically Designed For LSE Plastics

Order 3M DP8005 (Low Surface Energy Plastic Adhesive) Online Here For Delivery Australia Wide !

3M Scotch-Weld Structural Plastic Adhesive DP8005 is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

This produduct is a  Duo-Pak (DP) - 2 part adhesive, which can only be used with - Orange 3M mixing Nozzles & the EPX Pluss II Applicator to ensure accurate metering, mixing and dispensing.

3M's DP8005 LSE Glue creates a Strong Bond on Low Surface Energy Plastics. Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M Scotch-Weld Structural Plastic Adhesive DP8005 bonds metals, ceramics, and wood and most other plastics. 

Recommended Applications for DP8005 Glue / Adhesive include;

• Joining plastics to metals, such as in the manufacture or repair of appliances
• Bonding low surface energy plastics (LSE plastics) without priming
• Impact resistance composite bonding
• Manufacture or repair of various sporting goods equipment
• Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)

3M Scotch-Weld Structural Plastic Adhesive DP8005 starts with medium viscosity for controlled dispensing, and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 3 minute work life. The adhesive reaches handling strength in approximately 3 hour and is fully cured in 24 hours (at 72°c).